AA6061 alloy
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Adsorption
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Adsorption
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2023, Pages 24-37]
Alumina
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Anisotropic polarization
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Atmospheric Water Harvesting
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
B
Binder free electrode
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Bioactive Glass
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Bone tissue engineering
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Boron nitride nanocones
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Brushing
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
C
Cell Viability
Design of a Polymer-grafted Graphene Oxide Based Drug Delivery System for Curcumin: Optimization Using RSM and Cytotoxicity study [Volume 12, Issue 2, 2023, Pages 13-28]
Central composite design
Design of a Polymer-grafted Graphene Oxide Based Drug Delivery System for Curcumin: Optimization Using RSM and Cytotoxicity study [Volume 12, Issue 2, 2023, Pages 13-28]
Chemical Deposition
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Chitosan
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Colloidal Suspension
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Composite
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Computational model
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Controlled release
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2023, Pages 24-37]
Controlled release
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2023, Pages 1-14]
Co-precipitation
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Cross-Linker
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Cyclodextrin
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
D
Density functional theory
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Density of states
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Drug release
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2023, Pages 48-60]
E
Electrophoretic deposition
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
F
Feedstock
Fabrication of Zirconia Crucible Using Low-Pressure Injection Molding Process & Investigation of Effective Parameters [Volume 12, Issue 3, 2023, Pages 65-77]
Fiber
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
FMG Particles
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Fractography
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Functionally graded coating (FGC)
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
G
Gas pressure
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Gelatin
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
H
Height and disclination angles
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Hybrid Nanogenerator
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Hydrothemal Synthesis
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
Hydroxyapatite (HA)
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
L
Lithium-ion battery
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
M
Magnetic properties
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Mechanical coating technique (MCT)
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
Mechanical properties
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Melting method
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Microporosity
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Microstructural Properties
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Microstructure
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Microstructure
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Mullite
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
N
Nanocomposite
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2023, Pages 24-37]
Nanocomposite
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2023, Pages 48-60]
Nanoindentation
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
Nax Zeolite
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
NCM
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
NdFeCoB Nanoparticles
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
New Cobalt-Nickel Base
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Nickel hydroxide
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Niosome
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2023, Pages 1-14]
Nitridation
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
P
Paranitrophenol
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
PDMS composite
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Peeling test
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Phase analysis
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Piezoelectric
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Piezoelectric Triboelectric
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Pollutant
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Porous materials
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
PZT
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
R
Reduction Diffusion
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Refinery Effluent
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
Rheology
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
S
Segregation Elements
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Silicon Nitride
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Single crystal cathode
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Sintering
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Sintering aid
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Sol-Gel
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Spark plasma sintering (SPS)
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
SPS
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Superalloy
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Supercapacitor
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
T
Thermodynamic Modeling
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
Ti-6Al-4V alloy
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
Transmission
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Transparency
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Tungsten Carbide
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Two-Phase Aqueous System
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
W
Wash-out
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Wear
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Withdrawal Rate Mold
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Wollastonite
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2023, Pages 48-60]
X
Xanthan Gum
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2023, Pages 1-14]
Z
Zeta potential
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Zirconia
Fabrication of Zirconia Crucible Using Low-Pressure Injection Molding Process & Investigation of Effective Parameters [Volume 12, Issue 3, 2023, Pages 65-77]
ZnO nanostructure
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]